Become a fan of Slashdot on Facebook

 



Forgot your password?
typodupeerror
×
Moon Space NASA

Blue Origin Makes a Big Lunar Announcement Without Any Fanfare (arstechnica.com) 53

An anonymous reader quotes a report from Ars Technica: On Friday, in a blog post not even promoted by the company's Twitter account or a news release, Blue Origin quietly said its "Blue Alchemist" program has been working on [using the dusty lunar surface to manufacture solar panels] for the last two years. The company, founded by Jeff Bezos, has made both solar cells and electricity transmission wires from simulated lunar soil -- a material that is chemically and mineralogically equivalent to lunar regolith. The engineering work is based on a process known as "molten regolith electrolysis," and Blue Origin has advanced the state of the art for solar cell manufacturing. In this process, a direct electric current is applied to the simulated regolith at a high temperature, above 1,600-degrees Celsius. Through this electrolysis process, iron, silicon, and aluminum can be extracted from the lunar regolith. Blue Origin says it has produced silicon to more than 99.999 percent purity through molten regolith electrolysis.

The key advance made by Blue Alchemist is that its engineers and scientists have taken the byproducts of this reaction -- and these materials alone -- to fabricate solar cells as well as the protective glass cover that would allow them to survive a decade or longer on the lunar surface. Blue Origin will attempt to market the technology to NASA for use by its Artemis program to return humans to the Moon in a "sustainable" way. NASA and its international partners seek to differentiate Artemis from the Apollo program by more extended stays on the Moon and building infrastructure such as power systems.

"Although our vision is technically ambitious, our technology is real now," the company said in its blog post. "Blue Origin's goal of producing solar power using only lunar resources is aligned with NASA's highest priority Moon-to-Mars infrastructure development objective." This is a notable research breakthrough, as the same electrolysis process could also be used to produce metals for building habitats and other structures, as well as oxygen. These are all important for "living off the land" if humans are to avoid the expense of needing to bring everything from Earth to live and work in space. While it is a long way from lab experiments to manufacturing on the Moon, these experiments are a critical first step.

This discussion has been archived. No new comments can be posted.

Blue Origin Makes a Big Lunar Announcement Without Any Fanfare

Comments Filter:
  • the very solar cells the process produces! Brilliant!

    Oh wait...um...I'm sure we can get some generators (and fuel.. and oxidizer) on Amazon. They deliver to the Moon, right?

    • by ceoyoyo ( 59147 )

      They tried summoning them through the power of wishful thinking, but that didn't work so well. Unfortunately some bootstrapping is required.

      Insightful comment though. Bravo.

    • by tragedy ( 27079 ) on Tuesday February 14, 2023 @12:32AM (#63291239)

      the very solar cells the process produces! Brilliant!

      Oh wait...um...I'm sure we can get some generators (and fuel.. and oxidizer) on Amazon. They deliver to the Moon, right?

      Maybe you're just trying to be funny, but it really does seem like you think you have some sort of point here. If you really are trying to make a point, it's utter nonsense. Yes, the power to make the first solar cell can't come from the solar cell that is to be produced. Congratulations for your grasp on basic causality. In the real universe, where engineers grasp causality as well, they know that they need to start with a power source not produced in situ by the machine. That can, in fact, still be solar cells, just obviously not ones made from the electricity that they will produce after they are made.

      Once a power source is set up and this machine is being provided with the raw materials and power to produce solar panels, you can grow a solar farm and, the more and more solar panels, the more and more power and, presumably, the faster you can produce new panels. Obviously this hits an upper limit at the point where the machine is producing panels as fast as we can. Its not a Von Neumann machine after all. Whether you build up the power supply for the panel-maker first, or you power other processes at the same time will vary. Once you have max power to the machine though, you can pretty much just produce panels to power your habitat, factories, moon rovers, etc.

      There are other potential limitations and questions, of course. For example, are there other consumables? They make solar cells and protective glass out of regolith, but what about wiring, connectors, etc.? Then there are other needed components like battery controllers, breaker boxes, and other electrical equipment. If those are not produced in situ then they need to be brought along. There is also the question of if other consumables aside from regolith are needed for production. Other chemicals? Replacement electrodes, etc.? Requirements like this still don't ruin the idea of in situ resource usage. As long as you can ultimately get more power per unit mass shipped, then you're ahead. Even just producing 50% more solar power than you could have by just shipping the equivalent mass in solar panels then you're doing well

      • by CaptQuark ( 2706165 ) on Tuesday February 14, 2023 @01:10AM (#63291279)

        but what about wiring, connectors, etc.?

        The wiring might not be a problem. One of the extracted elements is aluminum, which is very conductive. Aluminum provides a better conductivity to weight ratio than copper, and therefore is also used for wiring power grids, including overhead power transmission lines and local power distribution lines, as well as for power wiring of some airplanes. In North American residential construction, aluminum wire was used for wiring entire houses for a short time from the 1960s to the mid-1970s during a period of high copper prices. https://en.wikipedia.org/wiki/... [wikipedia.org]

        • Re: (Score:3, Interesting)

          by Anonymous Coward

          I remember aluminum wiring in homes back in the 70s. Anytime a copper wire needed to be connected to an aluminum wire, an antioxidant paste had to be applied to the connection and a specialize AL/CU connector had to be used. We also had to be sure to use the correct connector for CU/CU connections and AL/AL connections. The proper circuit breaker box, switches, and receptacles also had to be used for the selected wire type. It added complexity to the job.

        • by tragedy ( 27079 )

          Aluminum wiring always has a bit of an oxidation problem. Aluminum is a very good conductor, but aluminum oxide is a very good insulator and a very thin coating of it could wreck a connection to an aluminum wire, even between two aluminum wires. On the moon, at least outside the habitat, that should not be a problem at all .

          • This is a pretty well-solved problem at this point, though, whether through oxygen shield compounds or sacrificial anodes. You can buy breakers and receptacles designed to have aluminum wiring attached to them.

            • by tragedy ( 27079 )

              Yeah, I was more grousing about wiring problems in old houses than modern usage. Certainly it would not be a problem on the Moon.

          • by ceoyoyo ( 59147 )

            You can look at that as a bad thing (connectors have to be a little more sophisticated) or a good thing (wires have self-healing insultation).

            • by tragedy ( 27079 )

              Self-healing insulation. Now that is a way to look on the bright side. I wonder how practical that is in, for example electric motor windings where the motor may overheat and the insulation burns off?

              • by ceoyoyo ( 59147 )

                Aluminum oxide melts at over 2000 degrees, compared to aluminum at 650ish, so I'm not sure that particular situation is one you'd find yourself in.

                A quick search found this though, which you might find interesting:

                https://ntrs.nasa.gov/citation... [nasa.gov]

                • by tragedy ( 27079 )

                  Aluminum oxide melts at over 2000 degrees, compared to aluminum at 650ish, so I'm not sure that particular situation is one you'd find yourself in.

                  Sorry, should have been more clear. I was thinking original insulation, not aluminum oxide, burns/melts off.

                  Your link does seem to more or less cover what I was wondering about though.

                  • by ceoyoyo ( 59147 )

                    Oh, sorry, that probably should have been obvious. I didn't read the whole thing yet, but from that NASA document it sounds like you could make aluminum wire without any other insulation. Presumably you could run a coil pretty hot, and the actual aluminum would melt long before the oxide.

                    If an aluminum wire was abraded the replacement oxide wouldn't be as thick as the anodized original, but it would be better than nothing, and would probably be pretty effective at filling in small gaps.

                    • by tragedy ( 27079 )

                      The light-weight aspect of it also seems pretty relevant for space travel. Not as much for in situ utilization on the Moon though. If you don't have to transport it to the Moon in the first place, then the mass does not matter so much mostly. I suppose insulation does not matter so much either if the wiring is mostly outside. Even wires just laying on the regolith should be pretty well insulated. You might have spots with some iron meteorite material and you might worry about wires touching and short circui

    • The point is that anything flown up from earth is incredibly expensive - more than the price of gold.
      • The point is that anything flown up from earth is incredibly expensive - more than the price of gold.

        Huh? SpaceX Falcon runs around ~$2500/kg to LEO if you're using the max payload. Gold is currently selling for $1874/oz or about $58000/kg. Or are you talking about space hardware being expensive?

    • by dbialac ( 320955 )
      The odd thing is, though, you don't really have to worry too much about air or ground pollution on the moon, but you do have to have something to react with for a chemical reaction to work.
  • If it didn't have big problems, they'd be angling to build a factory on the moon to supply other projects, instead of just offering to "market the technology."

    • Re: (Score:2, Interesting)

      by sillybilly ( 668960 )

      The money has to come from somewhere. Everyday people are not gonna be customers of this technology, but NASA is government funded and gets taxpayer money, and can allocate some to the Blue Alchemist project.

      This is very exciting. I always thought you'd have to separate the aluminum and iron and silicon from each other by some means - I remember reading about some engineers proposing filtering out crystallized silicon from a silicon-aluminum alloy in the molten state, that you would get from magma electroly

      • by Immerman ( 2627577 ) on Tuesday February 14, 2023 @10:35AM (#63291891)

        Yeah, this sounds like a extremely productive improvement over the original electrolytic refinery Sadoway developed for NASA a few years back (and which is slated to be deployed at a tiny-scale test project in the early phases of the moon base) , which only extracted steel and I think aluminum, with less common metals being a promising future option with further electrolysis refinement. I figured it would take a lot more development before bulk semiconductor quality silicon was an option. If local solar panel production is possible from very early on that would dramatically streamline lunar development. (Not to mention Mars and asteroids, if the technology is compatible with available regolith)

        Not only will making solar panels locally be a huge long-term advantage, producing silicon will also *greatly* increase the yield of the primary short-term export: oxygen. Which is both extremely ecologically important, and also ~80% of the propellant mass for methane rockets, and even more for hydrogen rockets. Even if you still have to bring the fuel from Earth, not having to also bring the huge mass of oxygen to make it useful is a dramatic improvement.

        As for regolith composition, as I recall it's mostly silicon dioxide (a.k.a. quartz, the most chemically stable form of silicon) with some iron oxide (FeO) and aluminum oxide (Al2O3). And given the elemental ratios, most of the oxygen is bound to silicon, so refining that would dramatically increase the oxygen yields per ton of regolith. The average elemental ratio of the most lunar regolith components is ~43% oxygen, 21% silicon,10% aluminum and 9% iron, though the iron:aluminum ratio changes with altitude.

        At a wild guess the electrolysis chamber is some sort of ceramic, they tend to be the first choice for extreme chemical and thermal stability. Metals melt at relatively low temperatures, and tend to be highly reactive, I'm not sure why you even bother mentioning platinum in that context. Steel has a much higher melting point, to say nothing of quartz. The electrodes are a bigger challenge, since they must be directly involved in the chemical reactions without reacting themselves.

    • Re:Skeptical (Score:4, Interesting)

      by JaredOfEuropa ( 526365 ) on Tuesday February 14, 2023 @04:25AM (#63291405) Journal
      First, they'd have to get there. Then their customers have to get there. "There" not being "the moon" but a specific area on it. Selling the tech to NASA seems like a much faster way to get paid, and I', sure they'll hang on to the patents themselves.
      • Exactly. Trying to create a business model when getting in on the ground floor is a losing proposition. When it comes to off-world outposts I like to invoke the analogy of a military fort in largely undeveloped wilderness as the best terrestrial analog. You build a fort for purely strategic reasons, usually to secure control over something important like a river junction or remote but valuable mine. And it's initially pure expense - it has no exports, nor industry, nor agriculture to support itself, and

  • by phantomfive ( 622387 ) on Tuesday February 14, 2023 @12:07AM (#63291201) Journal
    now hopefully they can manufacture oxygen from materials on the moon.
    • Re:Great (Score:4, Interesting)

      by ShanghaiBill ( 739463 ) on Tuesday February 14, 2023 @12:13AM (#63291215)

      now hopefully they can manufacture oxygen from materials on the moon.

      Oxygen is no problem. Lunar regolith is 40% oxygen.

      The problem is getting enough hydrogen and nitrogen.

      • And phosphorus, potassium, carbon. If you want to grow stuff to eat.
        • Re:Great (Score:4, Interesting)

          by ShanghaiBill ( 739463 ) on Tuesday February 14, 2023 @02:47AM (#63291337)

          And phosphorus, potassium, carbon. If you want to grow stuff to eat.

          Those are all available in lunar regolith in concentrations similar to the earth's crust.

          Nitrogen and hydrogen are not.

          • Hopefully as we start developing the moon in earnest we'll find mineral deposits rich in such things. For now we're really only looking to utilize the resources we can positively identify from orbital surveys and robot probes that barely scratch the uppermost layers of the surface.

            If not... well then I anticipate a booming import market for ammonia and petroleum. (carbon being another thing the moon seems short on, though the asteroid remnants in about 70% of impact craters should contain generous if incon

            • I should clarify - yes the crust may contain similar amounts of carbon... but on Earth we've had billions of years of life concentrating subsurface carbon (released as volcanic CO2) into an incredibly carbon-rich "surface scum" of life. If we want a similar ecosystem in a moon base we're going to need a lot more carbon than is easily accessible from its crust.

      • Interesting thanks
      • Oxygen is no problem. Lunar regolith is 40% oxygen.

        In fact, from the tiny description in the base post, the basic process consists of removing that oxygen to get to the base metals, letting the oxygen fly away in the lunar vacuum or capturing it as well. Bonus: The critical component of breathing air (or breathe it directly at lowered pressure).

        But you'd better capture it, or (as they used to say in the L5 society) you could end up with air pollution on the moon, by polluting its vacuum with air. Releas

  • Have they made it to orbit, yet?

    They also still haven't explained what went wrong with their NS25 [space.com] failure either.

  • These guys can't even get to orbit. Next they'll be telling us of their plans to colonize Alpha Centauri.

  • Comment removed based on user account deletion

C for yourself.

Working...