General Motors said on Friday it was recalling 68,677 electric cars worldwide that pose a fire risk after five reported fires and two minor injuries. Reuters reports: The recall is for 2017-2019 model-year Chevrolet Bolt EVs with high voltage batteries produced at LG Chem's Ochang, Korea facility. The National Highway Traffic Safety Administration (NHTSA) last month opened a preliminary investigation into the Bolt EVs after reports of three Bolts catching fire under the rear seat while parked and unattended.

GM said the vehicles pose a fire risk when charged to full, or nearly full capacity. GM said it has developed software that will limit vehicle charging to 90% of full capacity to mitigate the risk while GM works to determine the appropriate final repair. NHTSA said in a consumer alert on Friday that Bolt owners âoeshould park their cars outside and away from homes until their vehicles have been repaired, due to a new recall for the risk of fire.â The recall includes 50,932 U.S. Bolt vehicles.

An anonymous reader quotes a report from Ars Technica: On Thursday, an Amazon AWS blogpost announced that the company has moved most of the cloud processing for its Alexa personal assistant off of Nvidia GPUs and onto its own Inferentia Application Specific Integrated Circuit (ASIC). Amazon dev Sebastien Stormacq describes the Inferentia's hardware design as follows: "AWS Inferentia is a custom chip, built by AWS, to accelerate machine learning inference workloads and optimize their cost. Each AWS Inferentia chip contains four NeuronCores. Each NeuronCore implements a high-performance systolic array matrix multiply engine, which massively speeds up typical deep learning operations such as convolution and transformers. NeuronCores are also equipped with a large on-chip cache, which helps cut down on external memory accesses, dramatically reducing latency and increasing throughput."

When an Amazon customer -- usually someone who owns an Echo or Echo dot -- makes use of the Alexa personal assistant, very little of the processing is done on the device itself. [...] According to Stormacq, shifting this inference workload from Nvidia GPU hardware to Amazon's own Inferentia chip resulted in 30-percent lower cost and 25-percent improvement in end-to-end latency on Alexa's text-to-speech workloads. Amazon isn't the only company using the Inferentia processor -- the chip powers Amazon AWS Inf1 instances, which are available to the general public and compete with Amazon's GPU-powered G4 instances. Amazon's AWS Neuron software development kit allows machine-learning developers to use Inferentia as a target for popular frameworks, including TensorFlow, PyTorch, and MXNet.

Samsung LSI today announced the new Exynos 1080 SoC (system on chip), a successor to last year's Exynos 980. This year's 1080 is seemingly positioned a little above the 980 in terms of performance as we're seeing some quite notable gains in features compared to the 980. From a report: It's to be remembered that this is a "premium" SoC, meaning it's not a flagship SoC, but it's also not quite a mid-range SoC, fitting itself in-between those two categories, a niche which has become quite popular over the last 1-2 years. The new SoC is defined by having a new 1+3+4 CPU configuration, as reasonably large GPU, and full 5G connectivity integrated, and is the first publicly announced SoC to be manufactured on Samsung's new 5LPE process node. On the CPU side of things, this is the first time we've seen Samsung adopt a 1+3+4 CPU configuration, now adopting the Cortex-A78 architecture on the part of the performance cores. One core is clocked at 2.8GHz while the three others are running at 2.6GHz. Qualcomm had first introduced such a setup and it seems it's become quite popular as it gives the benefit of both performance and power efficiency. The four big cores are accompanied by four Cortex-A55 cores at 2.0GHz.

schwit1 shares a report from Phys.Org: Forget glue, screws, heat or other traditional bonding methods. A Cornell University-led collaboration has developed a 3-D printing technique that creates cellular metallic materials by smashing together powder particles at supersonic speed. This form of technology, known as "cold spray," results in mechanically robust, porous structures that are 40% stronger than similar materials made with conventional manufacturing processes. The structures' small size and porosity make them particularly well-suited for building biomedical components, like replacement joints.

The team's paper, "Solid-State Additive Manufacturing of Porous Ti-6Al-4V by Supersonic Impact," published Nov. 9 in Applied Materials Today. "If we make implants with these kind of porous structures, and we insert them in the body, the bone can grow inside these pores and make a biological fixation," Moridi said. "This helps reduce the likelihood of the implant loosening. And this is a big deal. There are lots of revision surgeries that patients have to go through to remove the implant just because it's loose and it causes a lot of pain." Moridi added: "We only focused on titanium alloys and biomedical applications, but the applicability of this process could be beyond that. Essentially, any metallic material that can endure plastic deformation could benefit from this process. And it opens up a lot of opportunities for larger-scale industrial applications, like construction, transportation and energy."

A consortium led by Rolls Royce has announced plans to build up to 16 mini-nuclear plants in the UK. The BBC reports: It says the project will create 6,000 new jobs in the Midlands and the North of England over the next five years. The prime minister is understood to be poised to announce at least 200 million pounds for the project as part of a long-delayed green plan for economic recovery. Rolls argues that as well as producing low-carbon electricity, the concept could become a new export industry.

The company's UK "small modular reactor" (SMR) group includes the National Nuclear Laboratory and the building company Laing O'Rourke. The government says new nuclear is essential if the UK is to meet its target of reaching net zero emissions by 2050 -- where any carbon released is balanced out by an equivalent amount absorbed from the atmosphere. But there is a nuclear-sized hole opening up in the energy network. Six of the UK's seven nuclear reactor sites are due to go offline by 2030 and the remaining one, Sizewell B, is due to be decommissioned in 2035. Together they account for around 20% of the country's electricity.

Each plant would produce 440 megawatts of electricity -- roughly enough to power Sheffield -- and the hope is that, once the first few have been made, they will cost around 2 billion pounds each. The consortium says the first of these modular plants could be up and running in 10 years, after that it will be able to build and install two a year. By comparison, the much larger nuclear plant being built at Hinkley Point in Somerset is expect to cost some 22 billion pounds but will produce more than 3 gigawatts of electricity -- over six times as much.

Anmar Frangoul writes via CNBC: Work has started on a liquid air energy storage site in the northwest of England, with the team behind the project stating it will be one of the largest energy storage systems in Europe. Highview Power's 50 megawatt facility in Greater Manchester will harness technology that uses something called "air liquefaction." The system involves a number of steps: excess or off peak electricity powers an air liquefier. This cleans, compresses then cools ambient air, turning it into a liquid at -196 degrees Celsius (around -320 Fahrenheit). According to the company, this liquid air is "stored at low pressure and later heated and expanded to drive a turbine and generate power."

The technology being deployed by Highview Power stems from an idea developed by Peter Dearman, the brains behind the concept of a "liquid air engine." According to the U.K. government, Dearman -- who's been described by the BBC as a "self-taught backyard inventor" -- worked alongside a team from the University of Leeds to develop the idea of "using air as a form of energy storage" when compressed and liquefied. The new site, which is scheduled to open in 2023, will be operated by Highview Power in partnership with another firm called Carlton Power.

An anonymous reader quotes a report from Tom's Hardware: Western Digital is one of the most vocal proponents of the Zoned Namespaces (ZNS) storage initiative, so it is not surprising that the company this week became the first SSD maker to start sampling of a ZNS SSD. When used properly, the Ultrastar DC ZN540 drive can replace up to four conventional SSDs, provide higher performance and improve quality of service (QoS).

ZNS SSDs have a number of advantages over traditional block-based SSDs. For one, they place data sequentially into zones and have better control over write amplification, since the software 'knows' what it is dealing with. This means that ZNS SSDs don't need as much overprovisioning as traditional enterprise drives. Many enterprise drives rated for 3DWPD (drive writes per day) reserve up to 28% of their raw capacity for overprovisioning. ZNS needing as little as a tenth of that significantly increases usable SSD capacity. Second, since ZNS manages large zones rather than a bunch of 4KB blocks and doesn't need to perform garbage collection as often as traditional SSDs, it also improves real-world read and write performance. Finally, ZNS substantially reduces DRAM requirements.

szczys writes: When the Raspberry Pi 400 (a keyboard form-factor single board computer) was released last week, the company hinted at overclocking. Testing has now shown that the heat spreader used in that design does an excellent job. The chip was already clocked at 1.8 GHz, versus the stock 1.5 GHz in the original Raspberry Pi 4 Model B board. But it can be safely overclocked to 2.15 GHz, as can the Compute Module 4 with an adequate heat sink.

At 2.0 GHz, the Pi 400 got up above 60 C and showed signs of continuing to warm up even after 50 minutes, but it was nowhere near throttling. So I tried 2.2 GHz, at which speed the CPU refused to boot entirely. Backing down to 2.15 GHz, it ran just fine, so I left it for three hours. It settled in at a cozy 62.5 C, which is warm, but well within specs.

I ran the CM4 with the larger heatsink at 1.8 GHz to give some basis for comparison to the cheap heatsinks. What a big difference a big hunk of aluminum makes! It settled in at a comfortable 68 C or so. Even pushing it up to 2.15 GHz and leaving it for a couple hours, it stayed just a hair below 70C (158F) -- a safe margin on the throttling threshold -- and only a few degrees warmer than that huge heat spreader in the Pi 400.

Further reading: The Verdict After Hackaday's Teardown of a Raspberry Pi 400: 'Very, Very Slick'.

Come June 1, 2021, Google will change its storage policies for free accounts -- and not for the better. Basically, if you're on a free account and a semi-regular Google Photos user, get ready to pay up next year and subscribe to Google One. From a report: Currently, every free Google Account comes with 15 GB of online storage for all your Gmail, Drive and Photos needs. Email and the files you store in Drive already counted against those 15 GB, but come June 1, all Docs, Sheets, Slides, Drawings, Forms or Jamboard files will count against the free storage as well. Those tend to be small files, but what's maybe most important here, virtually all of your Photos uploads will now count against those 15 GB as well. That's a bid deal because today, Google Photos lets you store unlimited images (and unlimited video, if it's in HD) for free as long as they are under 16MP in resolution or you opt to have Google degrade the quality. Come June of 2021, any new photo or video uploaded in high quality, which currently wouldn't count against your allocation, will count against those free 15 GB. [...] In addition to these storage updates, there's a few additional changes worth knowing about. If your account is inactive in Gmail, Drive or Photos for more than two years, Google 'may' delete the content in that product.

An anonymous reader quotes a report from TechCrunch: SoftBank Group Corp. is in talks to sell robot maker Boston Dynamics to Hyundai, people familiar with the matter said. Proposed terms of the deal would give the South Korean automaker control of the robotics company in a transaction valued at as much as $1 billion, said one of the people, all of whom asked not to be identified because the discussions are private. The terms have yet to be finalized, and the deal could fall apart, said the people.

A sale of Boston Dynamics would mark another twist in the trajectory of a company that spun out of the Massachusetts Institute of Technology in the early 1990s and operated independently until Google bought it in 2013. It was sold again in 2017, that time to SoftBank. At times, Boston Dynamics has functioned more like a research organization than a business, churning out machines that are technologically advanced and whimsical but unprofitable. That includes Spot, a maneuverable dog-like robot. Videos of its creations regularly rack up millions of views on YouTube; however, the company has said it is not currently generating profits. By contrast, Hyundai makes highly practical industrial robots intended for factory use.

Dish Network announced that it will permanently shut down all of Sling Media's Slingbox services and end support for the devices in two years, at which point they'll no longer work. Variety reports: On Monday, Dish's Sling Media unit announced that Slingbox servers will be permanently taken offline 24 months from Nov. 9, 2020. "Until then, most Slingbox models will continue to work normally, but the number of supported devices for viewing will steadily decrease as versions of the SlingPlayer apps become outdated and/or lose compatibility," the company said in a message posted Monday.

In an FAQ about the shutdown, Dish said Slingbox is being discontinued because "We've had to make room for new innovative products so that we can continue to serve our customers in the best way possible." Sling will not be releasing any new products; most authorized resellers have been out of stock of the Slingbox devices "for a couple years," according to the company. Sling Media was acquired by EchoStar in 2007 for $380 million, which at the time was Dish's parent company. Years before Netflix became a streaming powerhouse, the Slingbox "place-shifting" devices let customers watch pay-TV channels over the internet. But the products never became a mainstream category in the way streaming-media players like Roku and Amazon's Fire TV have.

Micron has announced it's shipping 176-layer TLC NAND flash memory to customers, a move that portends larger, faster and even cheaper SSD drives for all. From a report: The company said its 5th-gen 3D NAND memory should put its density about 40 percent higher than its nearest competitors, which are using 128-layer NAND. Micron said read and write latencies are reduced by 35 percent compared to its 96-layer NAND, and by 25 percent compared its 128-layer NAND. Micron isn't the only NAND memory manufacturer that has 176 layers, but it is the first to start volume shipments. The Micron NAND is TLC, or three-bits per cell, and is said to have 33 percent faster transfer rates, as well as a 35 percent improvement in read and write latencies. And because it's TLC NAND instead of QLC, the new memory should offer better drive endurance, too. The 176-layer design comes from stacking two 88-layer stacks together, which isn't a new thing for Micron. You might think that's a trick, but the end result is still the same: far better density for larger drives. Micron said the new 176-layer NAND is about as thick as one-fifth of a sheet of printer paper, and works out to be as thick its previous 64-layer NAND despite having more than twice as many layers. In the end, this will lead to larger SSDs and potentially cheaper ones, too.

Apple has introduced the new M1 chip that will power its new generation of Arm-based Macs. It's a 5nm processor, just like the A14 Bionic powering its latest iPhones. From a report: Apple says the new processor will focus on combining power efficiency with performance. It has an eight-core CPU, which Apple says offers the world's best performance per watt of an CPU. Apple says it delivers the same peak performance as a typical laptop CPU at a quarter of the power draw. It says this has four of the world's fastest CPUs cores, paired with four high-efficiency cores. It pairs this with up to an eight-core GPU, which Apple claims offers the world's fastest integrated graphics, and a 16-core Neural Engine. In addition, the M1 processor has a universal memory architecture, a USB 4 controller, media encode and decode engines, and a host of security features. These include hardware-verified secure boot, encryption, and run-time protections.

fahrbot-bot shares a report from CNN: A team of physicists at a university in the Netherlands have 3D-printed a microscopic version of the USS Voyager, an Intrepid-class starship from Star Trek. The miniature Voyager, which measures 15 micrometers (0.015 millimeters) long, is part of a project researchers at Leiden University conducted to understand how shape affects the motion and interactions of microswimmers.

Microswimmers are small particles that can move through liquid on their own by interacting with their environment through chemical reactions. The platinum coating on the microswimmers reacts to a hydrogen peroxide solution they are placed in, and that propels them through the liquid. "By studying synthetic microswimmers, we would like to understand biological microswimmers," Samia Ouhajji, one of the study's authors, told CNN. "This understanding could aid in developing new drug delivery vehicles; for example, microrobots that swim autonomously and deliver drugs at the desired location in the human body." In their project, the physicists also printed shapes like boats, trimers and helices, with each object's shape affecting their swimming behaviors.

Remembrance Sunday is the day of commemoration for British and Commonwealth servicemen, and the head of the British Armed Forces marked the occasion with a special interview on Sky News.

And he shared a thoughtful answer when asked whether the army might try to recruit fewer soldiers. "[W]hat I'm hinting at is that we need to be thinking about how we measure effects in a different way. I mean I suspect we can have an army of 120,000 of which 30,000 might be robots, who knows. But the answer is we need to open our minds to perhaps numbers not determining what we should be doing but rather the effect that we can achieve, is really what we should be looking for."

The armed forces are playing a key role in the government's response to the pandemic, with some 2,000 personnel deployed to Liverpool to help with a mass coronavirus testing programme for the city. "I suspect if that works successfully we might find there are other areas where we need to help in a similar sort of fashion," General Carter said. He said using the military to take over the entire coronavirus testing programme was an option but added that he had confidence in the current set-up at the moment.
The Guardian focused on the robots: Thirty thousand "robot soldiers" could form an integral part of the British army in the 2030s, working alongside humans in and around the frontline, the head of the armed forces said in a television interview on Sunday...

All Britain's armed forces have been engaged in a string of research projects involving small drones or remotely powered land or underwater vehicles, some of which are armed and others for reconnaissance. The Ministry of Defence says its policy is that only humans will be able to fire weapons, although there is growing concern about the potential danger of unrestricted robot warfare, led by the Campaign to Stop Killer Robots.

Technology under development includes the i9 drone, which is powered by six rotors and carries two shotguns. Remotely operated, it is intended to be used to storm buildings, typically an urban warfare situation that generates some of the highest casualties.

In a new essay at EFF.org, Cory Doctorow re-visits HP's anti-consumer "security updates" that disabled third-party ink cartridges (while missing real vulnerabilities that could actually bypass network firewalls).

Doctorow writes that it was just the beginning: HP's latest gambit challenges the basis of private property itself: a bold scheme! With the HP Instant Ink program, printer owners no longer own their ink cartridges or the ink in them. Instead, HP's customers have to pay a recurring monthly fee based on the number of pages they anticipate printing from month to month; HP mails subscribers cartridges with enough ink to cover their anticipated needs. If you exceed your estimated page-count, HP bills you for every page (if you choose not to pay, your printer refuses to print, even if there's ink in the cartridges). If you don't print all your pages, you can "roll over" a few of those pages to the next month, but you can't bank a year's worth of pages to, say, print out your novel or tax paperwork. Once you hit your maximum number of "banked" pages, HP annihilates any other pages you've paid for (but continues to bill you every month).

Now, you may be thinking, "All right, but at least HP's customers know what they're getting into when they take out one of these subscriptions," but you've underestimated HP's ingenuity. HP takes the position that its offers can be retracted at any time. For example, HP's "Free Ink for Life" subscription plan offered printer owners 15 pages per month as a means of tempting users to try out its ink subscription plan and of picking up some extra revenue in those months when these customers exceeded their 15-page limit. But Free Ink for Life customers got a nasty shock at the end of last month: HP had unilaterally canceled their "free ink for life" plan and replaced it with "a $0.99/month for all eternity or your printer stops working" plan...

For would-be robber-barons, "smart" gadgets are a moral hazard, an irresistible temptation to use those smarts to reconfigure the very nature of private property, such that only companies can truly own things, and the rest of us are mere licensors, whose use of the devices we purchase is bound by the ever-shifting terms and conditions set in distant boardrooms. From Apple to John Deere to GM to Tesla to Medtronic, the legal fiction that you don't own anything is used to force you to arrange your affairs to benefit corporate shareholders at your own expense. And when it comes to "razors and blades" business-model, embedded systems offer techno-dystopian possibilities that no shaving company ever dreamed of: the ability to use law and technology to prevent competitors from offering their own consumables. From coffee pods to juice packets, from kitty litter to light-bulbs, the printer-ink cartridge business-model has inspired many imitators.

HP has come a long way since the 1930s, reinventing itself several times, pioneering personal computers and servers. But the company's latest reinvention as a wallet-siphoning ink grifter is a sad turn indeed, and the only thing worse than HP's decline is the many imitators it has inspired.

"You can't send Hackaday a piece of gear without us taking it apart," warns an article shared by Slashdot reader beggarwoman.

Hackady's verdict? The new Raspberry Pi 400 "is very, very slick." Inside, there's a flat-flex that connects the keyboard, and you see that big aluminum heat sink. It's almost the full size of the keyboard, and it's thick and heat-taped to the CPU. You know it means business. It's also right up against the aluminum bottom of the keyboard, suggesting it could get radiative help that way, and maybe keep your fingers warm in the winter. (I didn't feel any actual heat, but it's gotta go somewhere, right? There are also vents in the underside of the case.)

Four PZ1 screws and a little bit of courage to unstick the pad get you underneath the heat spreader to find, surprise!, a Raspberry Pi 4. This was a little anticlimactic, as I've just spent a couple weeks looking over the schematics for my review of the new Compute Module 4, and it's just exactly what you'd expect. It's a Raspberry Pi 4, with all the ports broken out, inside a nice keyboard, with a beefy heat spreader. Ethernet magnetics sit on one side, and the wireless module sits on the other. That's it!
"[C]ombine this with a small touch screen, and run it all off of a 5 V power pack, and you've got a ton of portable computing in a very small package.

"If you're not mousing around all the time anyway, there's a certain streamlined simplicity here that's mighty tempting."

"Joe Biden, the projected winner of the U.S. presidency, will move to restore dozens of environmental safeguards President Donald Trump abolished," reports the Washington Post, "and launch the boldest climate change plan of any president in history."

destinyland shares their report: While some of Biden's most sweeping programs will encounter stiff resistance from Senate Republicans and conservative attorneys general, the United States is poised to make a 180-degree turn on climate change and conservation policy. Biden's team already has plans on how it will restrict oil and gas drilling on public lands and waters; ratchet up federal mileage standards for cars and SUVs; block pipelines that transport fossil fuels across the country; provide federal incentives to develop renewable power; and mobilize other nations to make deeper cuts in their own carbon emissions... Biden has vowed to eliminate carbon emissions from the electric sector by 2035 and spend $2 trillion on investments ranging from weatherizing homes to developing a nationwide network of charging stations for electric vehicles.

That massive investment plan stands a chance only if his party wins two Senate runoff races in Georgia in January; otherwise, he would have to rely on a combination of executive actions and more-modest congressional deals to advance his agenda.

Still, a number of factors make it easier to enact more-ambitious climate policies than even four years ago. Roughly 10% of the globe has warmed by 2 degrees Celsius (3.6 degrees Fahrenheit), a temperature rise the world has pledged to avoid. The price of solar and wind power has dropped, the coal industry has shrunk, and Americans increasingly connect the disasters they're experiencing in real time — including more-intense wildfires, hurricanes and droughts — with global warming. Biden has made the argument that curbing carbon will produce high-paying jobs while protecting the planet...

Some of the new administration's rules could be challenged in federal court, which have a number of Trump appointees on the bench. But even some conservative activists said that Biden could enact enduring policies, whether by partnering with Congress or through regulation... The new administration may be able to broker compromises with key industries that have experienced regulatory whiplash in the past decade, including the auto industry and power sector, while offering tax breaks for renewable energy that remain popular with both parties. And Biden can rebuild diplomatic alliances that will spur foreign countries to pursue more-ambitious carbon reductions...

Biden's advisers have said that they plan to elevate climate change as a priority in departments that have not always treated it as one, including the Transportation, State and Treasury departments. It will influence key appointments, affecting everything from overseas banking and military bases to domestic roads and farms.... Biden's pledge to achieve a carbon-free U.S. power sector within 15 years would mean the closing or revamping of nearly every coal- and gas-fired power plant around the country, and the construction of an unprecedented number of new wind turbines and solar farms. On top of that, engineers still need to devise a better way of storing energy when the sun is not shining or the wind is not blowing.

"If I were advising Biden on energy, my first three priorities would be storage, storage and storage," said Sen. Angus King, I-Maine, who worked in the alternative energy businesses before running for office.

An anonymous reader quotes a report from Bloomberg: France's Neoen SA will partner with Tesla Inc. to install one of the world's biggest lithium-ion batteries in Australia after reaching a grid connection deal with the power market operator. The 300-megawatt Victorian Big Battery will be located in the southeastern city of Geelong and use Tesla's Megapack technology. It will be double the size of Neoen's Hornsdale site in South Australia, which was the largest facility when it began operation in 2017.

Installing the new system in Australia's second-most populous state will help to modernize and stabilize the local grid, which is targeting 50% of its power to come from renewable sources by 2030, Neoen said Thursday in a media release. The Paris-based company is targeting the battery to be operational by the end of 2021. [...] Victoria's grid still relies heavily on aging coal-fired plants, which have become increasingly unreliable during periods of extreme heat. The state has experienced power outages in recent summers as the system struggled to cope with a surge in demand as businesses and households cranked up air conditioners. Neoen's new project in Victoria will be supported by a 250 megawatt grid services contract with the Australian Energy Market Operator, and will also partner with network provider AusNet Services, the company said.

An anonymous reader quotes a report from Ars Technica: Time is starting to run out for vehicles powered purely by international combustion engines, and the auto industry knows it. This week Bentley, that bastion of British luxury, became the latest OEM to set a date for that happening -- the year 2030. As the company moves into its second century, it has revealed a new plan called "Beyond 100" that it says will "reinvent every aspect of its business to become an end-to-end carbon neutral organization.

Bentley already introduced a plug-in hybrid EV version of the Bentayga SUV and next year it plans to add another pair of PHEVs to its roster -- presumably the Continental GT coupe and Flying Spur sedan. In 2025, the company plans to introduce a battery electric vehicle; Bentley CEO Adrian Hallmark told Autoweek that "you've got to pick a point in time where battery power density, especially for bigger cars, is the liberator for us. We've always said that the mid-2020s is the time when you can expect to see 120-plus kilowatt-hour batteries coming through the supply chain." 2025 will also be the last year you'll be able to buy a Bentley that doesn't plug in, because in 2026 the brand is dropping everything other than PHEVs and BEVs. In 2030, those PHEVs will be gone, too, leaving just BEVs to wear the winged B badge with pride. Along the way, Bentley is also pledging to reduce its factory's environmental impact and go plastic neutral.