×
Hardware Hacking

Makerbot Thing-o-Matic 3D Printer Review 117

Posted by timothy from the not-for-the-faint-of-heart dept.
rsk points out this "review of the $1200 Makerbot Thing-o-Matic 3D printer. After a 16-hour self-assembly and a few weeks of use, a blown PSU was replaced with a higher powered PSU via a mod to the Thing-o-Matic. Video of the Thing-o-Matic printing out little solar panel mounts from Google Sketch-up included in the review. Final thoughts suggest that the Thing-o-Matic is not a great gift for non-engineers: 'You need a decent understanding of robotics, hardware, software, electronics and mechanics, need a little hand dexterity and a ton of patience.'"
Hardware Hacking

The Case of Apple's Mystery Screw 845

Posted by Soulskill from the licensing-the-operation-of-the-circuitry-inside dept.
Pickens writes "Network World reports that in the past if you wanted to remove the outer case on your iPhone 4 to replace the battery or a broken screen, you could use a Phillips screwdriver to remove two tiny screws at the base of the phone and then simply slide off the back cover. But now Apple is replacing the outer screw with a mysterious tamper-resistant 'pentalobular' screw across its most popular product lines, making it harder for do-it-yourselfers to make repairs. What about existing products in the field? Pentalobular screws might find their way into them, too. 'Apple's latest policy will make your blood boil,' says Kyle Wiens, CEO of iFixit. 'If you take your iPhone 4 into Apple for any kind of service, they will sabotage it by replacing your Phillips screws with the new, tamper-resistant screws. We've spoken with the Apple Store geniuses tasked with carrying out this policy, and they are ashamed of the practice.' Of course, only Apple-authorized service technicians have Pentalobular screwdrivers and they're not allowed to resell them. 'Apple sees a huge profit potential,' says Wiens. 'A hundred dollars per year in incremental revenue on their installed base is a tremendous opportunity.'"
Hardware Hacking

iPad + Macintosh Plus = Crazy Visualizer Helmet 113

Posted by timothy from the visualize-helmet-laws-sucking dept.
An anonymous reader writes "I would like to share with you a helmet I made out of a Macintosh Plus and an iPad. Essentially, I purchased a Macintosh Plus on ebay, removed the inner parts, cut a hole in the bottom of the case, inserted the inner padding of a bicycle helmet (cut to fit), and cut a slot for the iPad to slide in. The iPad's thinness allows for plenty of room for the user's head and the inner helmet keeps the Macintosh situated properly. What started as a project for my sculpture class has now become a part of my good friend Kid Chameleon's DJ set and a way for us to showcase our visuals in a new way during live performances."
Cellphones

HiJacking the iPhone's Headset Port 96

Posted by Soulskill from the universal-mod-slot dept.
An anonymous reader writes "Researchers at the University of Michigan describe how to hijack the iPhone's headset port to power peripherals, establish bi-directional communications with them, and interface various sensors, all without jailbreaking your iPhone or having to pay thousands to access to the Apple Dock Connector. This makes it possible for students, hackers, and DIYers to extend the phone's functionality to the physical world. The team is giving away 20 HiJack modules/programmers to enable new apps."
Hardware Hacking

How To Use a Real Guitar With Rock Band 3 180

Posted by CmdrTaco from the bet-it-knows-minor-chords-too dept.
wirelessdreamer writes "Using a real guitar, with a hex-aphonic pickup, and guitar synth rock band 3 pro guitar mode can be played NOW with a real guitar. Thanks to the game2midi project for makeing g2ghpro a multiplatform release. Selfless promotion as the submitter is the game2midi project lead :)"
Hardware Hacking

FreeBSD Running On PS3 127

Posted by kdawson from the what-took-so-long dept.
An anonymous reader writes "One week after Sony's PlayStation 3 private cryptography key was obtained, FreeBSD is up and running on the PS3. Nathan Whitehorn writes: 'Yesterday, I imported support for the Sony Playstation 3 into our 64-bit PowerPC port, expanding our game console support into the current generation. There are still a few rough edges due to missing hardware support, but the machine boots and runs FreeBSD stably. These rough edges should be smoothed out in time for the 9.0 release.'" Update: 01/10 15:04 GMT by KD : As several commenters have pointed out, the submission was misleading in that BSD runs in OtherOS, making no use of the cracked keys.
Hardware Hacking

First PlayStation 3 Custom Firmware Created 269

Posted by CmdrTaco from the you-bought-it dept.
Stoobalou writes "Hot on the heels of the discovery of the the PlayStation 3 private root key, and its subsequent leakage by iPhone hacker Geohot, the first custom firmware for the formerly impenetrable console has been released. A code wrangler known only as Kakaroto reckons he has created the world's first custom firmware for the popular console — although if you're expecting it to help you play pirated games, you might be a little disappointed."
Christmas Cheer

DIY Gyroscope Messenger As Christmas Gift

Posted by samzenpus from the homemade-gifts dept.
Csiko writes "The ingredients in this do-it-yourself Christmas project are a felt pen, a bunch of old CDs, an embedded microcontroller (MCU), some LEDs and a big portion of nerdism. While the gyroscope spins, the MCU controls the LEDs so that a writing appears in real-time. Nice project, but it definitely needs a nerd girlfriend to appreciate it."

How a Leather Cover Crashes the Kindle 280

Posted by CmdrTaco from the still-no-antennagate dept.
An anonymous reader writes "Amazon has started offering refunds to Kindle owners who own the unlit leather case who claim that it causes their Kindles to reboot, but are playing dumb on the cause: "our engineering team is looking into this." People have been wondering how a leather cover could possibly crash an electronic device, and why is Amazon offering money back if they don't think there's a problem? It seems that some of the folks over at Connectify have figured it out, and it's a doozy!"
Hardware Hacking

MakerBot Thing-o-Matic 3D Printer Assembly, In Pictures 105

Posted by timothy from the doesn't-yet-self-assemble dept.
ConMotto writes "After an estimated 16 man-hour assembly effort, these are some of the first high-quality user photographs of the Thing-o-Matic 3D printer and completed component assemblies, released December, 2010 by MakerBot. The Thing-o-Matic is a commercial-supported open source 3D printer (similar to the RepRap), allowing hardware hackers to print their own 3D objects out of Lego-like plastic."
Hardware Hacking

Calculator Networking With CALCnet and Doors CS 60

Posted by timothy from the site-for-sore-thumbs dept.
KermMartian writes "In an effort to make your trusty graphing calculator more like a computer, a shell called Doors CS has been developed, with an integrated networking stack, CALCnet2.2. The protocol is demonstrated in a nine-calculator pong-type demo, and the many file management, GUI, and other features of Doors CS can be seen at here. All the associated software is available for download."
Hardware Hacking

All-Analog DIY Segway Project Screenshot-sm 141

Posted by Soulskill from the take-out-some-cliff-insurance-buddy dept.
An anonymous reader writes "One of the zany hacker-makers here at MIT just finished this DIY Segway project (video). Difference from the others: it's all analog. The controller is built without a microprocessor or even digital logic. It does use a gyroscope like the real Segway. The functionality looks fairly basic, but the fact that the controller works at all is amazing. The guy has a ton of other projects on his site too. Definitely worth a read for people who enjoy building things."
Hardware Hacking

Cheap 3D Fab Could Start an Innovation Renaissance 258

Posted by kdawson from the ab-fab dept.
blackbearnh writes "An article over on O'Reilly Radar makes the argument that, just as inexpensive or free software development environments have led to a cornucopia of amazing Web and mobile applications, the plummeting cost of 3D fabrication equipment could enable myriad new physical inventions. The article was prompted by a new Kickstarter project, which if funded will attempt to produce a DIY CNC milling system for under $400. Quoting: 'We're already seeing the cool things that people have started doing with 3D fab at the higher-entry-level cost. Many of them are ending up on Kickstarter themselves, such as an iPhone 4 camera mount that was first prototyped using a 3D printer. Now I'm dying to see what we'll get when anyone can create the ideas stuck in their heads.'"
Hardware Hacking

Equipping a Small Hackerspace? 174

Posted by timothy from the vent-hood dept.
andy writes "After gentle prodding for about a year, my company actually agreed to include an electronics/robotics lab in the current build-out of our new office space. As I never really expected this to happen, I was at a bit of a loss when they asked me what sort of workbenches, equipment, etc. I wanted for the lab. The lab will only be approximately 9'x15' but there is a decent amount of vertical space to work with. I was thinking of having 2 workbenches side-by-side, one for 'hardware' and the other for 'software' with a floor-standing cabinet for storage. Semi-mobile workbenches might be a plus. Those of you that work in these sorts of environments, what do you recommend in the way of workbenches, storage, organization, and electronics?"
Hardware Hacking

Homemade Robotic Xylophone Plays Holiday Melodies 70

Posted by timothy from the percussion-from-a-distance dept.
compumike writes "Just in time to add a bit of geeky holiday cheer to your office, this video demonstrates how to build a robotic xylophone featuring handmade solenoids and aluminum bars, and shows it playing several classic holiday tunes. New songs can be programmed in with C macros, and this project could even be extended to perhaps play a melody when a new e-mail arrived or a software build has finished compiling!"
Graphics

Optical Camouflage Puts Kinect Into Stealth Mode 60

Posted by timothy from the where-are-you-anyhow dept.
UgLyPuNk writes "Takayuki Fukatsu, a Japanese coder who works under the name Art & Mobile, has done a bit of trickery with Kinect and openFrameworks. The peripheral will still track your movement and position, but turns your image nearly transparent. Take a look (it's particularly obvious at about 1:30):"
Hardware Hacking

Combining Two Kinects To Make Better 3D Video 106

Posted by Soulskill from the this-is-what-happens-when-yo dept.
suraj.sun sends this quote from Engadget about improving the Kinect 3D video recordings we discussed recently: "[Oliver Kreylos is] blowing minds and demonstrating that two Kinects can be paired and their output meshed — one basically filling in the gaps of the other. He found that the two do create some interference, the dotted IR pattern of one causing some holes and blotches in the other, but when the two are combined they basically help each other out and the results are quite impressive."

Slashdot Top Deals