"Reverberation is the persistence of sound in a particular space after the original sound is produced," says Wikipedia. More often than not, in studio recordings reverb is added digitally; virtually every FOSS or proprietary sound-editing program has a built-in reverb utility. But what if you're the sort of purist who prefers the analog sound of vinyl records to the digital sound of MP3s or CDs? What if you're the kind of musician who records at the original Sun Studio in Memphis to get that original rock and roll sound? That may be overly picky for most musicians, but there are some who would rather sound like Johnny Cash than Flavor Flav, and they're the ones who are going to insist on real analog reverb instead of twiddling a setting in Audacity. There are many types of analog reverbs, of course. One of the purest types, preferred by many audio purists, is the adjustable plate reverb, and Jim Cunnigham's Ecoplate is considered by many to be the best plate reverb ever -- which brings us to Mike Storey, who wanted an Ecoplate-type plate reverb so badly that he spent eight months building one. He'll run your audio files through it for a (highly negotiable) fee, and maybe give you a bit of advice if you want to build your own, although his biggest piece of advice for you (at the end of the video) to think long and hard before you become a home-brew reverberator, with or without advice and components from Jim Cunningham.

First time accepted submitter spanner888 writes "The first Shanghai Maker Carnival was held this weekend in conjunction with a Creation Exhibition, an arts and crafts expo with about 200 exhibitors. Makers attended from Shanghai, Beijing and Shenzhen and visitors came from around China. More photos are in this post, and videos in this one. Other photos can be found in this thread." I like the video that appears to show a smartphone's camera being used as the basis of an input device for a laptop; can anyone out there better explain it?

jjp9999 writes "By using the same technology found in older modems, Thomas Tumino, vice president of the Hall of Science Amateur Radio Club, has invented an iPhone interface for ham radios. He told The Epoch Times, 'Today there are iPhone apps where you can use the systems in the phone — and its sound card, which is being used as a modem ... And then you connect that into your radio with an interface like this, that just isolates the telephone from the radio, and then you can do all sorts of things.'"

antdude writes "Pumpktris is a fully playable version of Tetris built into a pumpkin, with 128 Light Emitting Diodes (LEDs) for the display and the stem serving as a game controller."

First time accepted submitter icepick3000 writes "There are probably many digital photoframes unused these days laying around. Mine is from the first generation meaning you can only insert a compact flash card and display photos. Newer models nowadays can display weather, news, and stocks. Anyone have some good idea's how to give these old frames a second life? I have been thinking about compact flash cards that support wifi... maybe someone has a better idea?"

An anonymous reader sends this quote from Wired: "Affordable 3-D printers and CNC mills are popping up everywhere, opening up new worlds of production to wide ranges of designers. However, one major tool still hasn’t received a DIY overhaul: the laser cutter. Maybe people are sensitive because Goldfinger tried to cut James Bond in half with one, but all that changes now with Patrick Hood-Daniel’s new Kickstarter, 'Build Your Own Laser Cutter.' ... A 40-watt laser tube and power supply means it can cut a variety of materials: wood, plastic, fabric, and paper. ... There is one major red flag, however. The machine’s frame is built from of Medium Density Overlay (MDO) — a type of plywood. Hood-Daniels says this is a feature, making the blackTooth less sensitive to thermal distortion and inaccuracy than a metal frame, but it also creates a serious, fire-breathing concern. ... When asked for comment, Hood-Daniel says 'Initially, I had the same thoughts as to the precarious use of wood for the structure, but even with long burns to the structure which were made on accident when starting a run, there was no ignition.'"

mikejuk writes "After six years in the making, the Arduino Due is finally becoming available and, with a price tag of $49, is bound to give a boost to the platform. The Due, which means 2 in Italian and is pronounced 'doo-eh', replaces the 8-bit, 16MHz Uno by a 32-bit, 84MHz processor board that also has a range of new features — more memory, a USB port that allows it to pretend to be a mouse or a keyboard say, 54 I/O pins and so on — but what lets you do more with it is its speed and power. The heart of the new Arduino Due is the Atmel SAM3X8E, an ARM Cortex-M3-based processor, which gives it a huge boost in ADC performance, opening up possibilities for designers. The theoretical sampling rate has gone from the 15 ksps (kilosamples per second) of the existing boards, the Arduino Uno, Leonardo, and Mega 2560, to a whopping 1,000 ksps. What this all means is that the Due can be used for much more sophisticated applications. It can even play back WAV files without any help. Look out for the Due in projects that once would have needed something more like a desktop machine."

jfruh writes "When the iPhone was first released in 2007, the blind community assessed it and determined it was essentially useless for them. Today it's the number one phone used by blind people, largely because of the efforts of the National Center for Accessible Media (NCAM). NCAM is part of WGBH, Boston's public television station, which broadcast the first captioned TV show in 1972. Since then NCAM has been a lifeline that makes sure that people with disabilities aren't left out of the technological revolution."

hypnosec writes "Amazon's latest Kindle Paperwhite is now officially jailbroken, giving users the ability to do things like turn their eReaders into weather station displays, or connect serially to a Raspberry Pi. To jailbreak the Paperwhite, the user needs to copy a file over to the root directory of the e-Reader and restart the device. The Kindle Paperwhite jailbreak is based on a previously known hack used on the Kindle Touch."

Revotron writes "Readers of Entertainment Weekly might be shocked to find their magazine is a good bit heavier than normal this week. US-based broadcaster CW placed an ad in Entertainment Weekly which uses a fully-functional 3G Android device, a T-Mobile SIM card, and a specialized app to display short video advertisements along with the CW Twitter feed. Writers at Mashable were willing to geek out with a Swiss Army knife and a video camera to give us all the gory details as they tore it down piece-by-piece to discover the inner workings of CW's new ad."

New submitter SirTicksAlot writes "I attended World Makerfaire 2012 NYC this past weekend and wanted to share some of the highlights of the faire. Makerfaire is a gathering of smart and talented groups and individuals who share their love for making things. And there is nearly no limit as to what kind of ideas or projects on display. There is no age limit or restriction and kids of all ages are encouraged to interact with everything they can. If you ever go to shows and see 'DO NOT TOUCH,' you did not see that here. Touching, inspecting and learning is very much warranted. There were many stations where kids could learn to use tools, assemble things, and even learn to solder."

For the homebrew hardware nerds out there who also homebrew beer: "BrewPi is an open source fermentation controller that runs on an Arduino (for now) and a Raspberry Pi. It can control your beer temperature with 0.1 degree precision, log temperature data in nice graphs and is fully configurable from a web interface." Source code. The article has lots of photos and screenshots. The project involves rewiring the compressor's electrical connection through a PID controller, and includes both a fancy OLED display on the fridge and support for logging statistics and control over the web. If you've ever had the joy of gradually crash-cooling a lager (not too fast, not too slow), the software includes settings to effect gradual temperatures changes in the fermenting wort. Certainly fancier than a Johnson controller and a probe attached to a fermenter with a strip of insulating tape.

An anonymous reader writes "Looking for an inexpensive means to capture audio from a dynamically moving crowd, I sampled many MP3 players' recording capabilities. Ultimately the best bang-for-the-buck was refurbished SanDisk Sansa Clip+ devices ($26/ea) loaded with (open source) RockBox firmware. The most massively multi-track event was a thorium conference in Chicago where many attendees wore a Clip+. Volunteers worked the room with cameras, and audio capture was decoupled from video capture. It looked like this. Despite having (higher quality) ZOOM H1n and wireless mics, I've continued to use the RockBox-ified Clip+ devices ... even if the H1n is running, the Clip+ serves as backup. There's no worry about interference or staying within wireless mic range. The devices have 4GB capacity, and RockBox allows WAV capture. They'll run at least 5 hours before the battery is depleted (with lots of storage left over). I would suggest sticking with 44kHz (mono) capture, as 48kHz is unreliable. To get an idea of their sound quality, here is a 10-person dinner conversation (about thorium molten salt nuclear reactors) in a very busy restaurant. I don't know how else I could have isolated everyone's dialog for so little money. (And I would NOT recommend Clip+ with factory firmware... they only support 22kHz and levels are too high for clipping on people's collars.)" This video incorporating much of that captured audio is worth watching for its content as well as the interesting repurposing.

An anonymous reader writes with this story from Wired: "When the African Robotics Network announced their $10 robot design challenge this summer, co-founder Ken Goldberg was careful not to share too many expectations, lest he influence contestants' designs. But he never imagined one of the winning entries would prominently feature a pair of Spanish lollipops. The challenge, hosted by AFRON co-founders Goldberg and Ayorkor Korsah, emphasized inexpensive designs to help bring robotics education to African classrooms." Winners include "the lollipop-laden Suckerbot and traditional (roaming) category first prize winner Kilobot, a Harvard-spawned three-legged, vibrating, swarming robot."

An anonymous reader writes "Dr. Dobb's shows how to take a $20 USB TV dongle and use it as a wide-range software defined radio using GNU Radio." See also the OscomSDR project, and SDR#, an MIT licensed program for debugging software defined radios.

jehan60188 writes about a research project (involving Steve Mann) that combines a welding helmet and realtime HDR image processing to give welders a clear view of what they're working on. From the article: "In this demonstration, we present a specialized version of HDR imaging (use of multiple differently exposed input images for each extended-range output image), adapted for use in electric arc welding, which also shows promise as a general-purpose seeing aid. TIG welding, in particular, presents an extremely high dynamic range scene (higher than most other welding processes). Since TIG welding requires keen eyesight and exact hand-to-eye coordination (i.e. more skill and more visual acuity than most other welding processes), being able to see in such extreme dynamic range is beneficial to welders and welding inspectors. ... We present HDRchitecture as either a fixed camera system (e.g. for use on a tripod), or as a stereo EyeTap cybernetic welding helmet that records and streams live video from a welding booth to students or observers, nearby or remote. By capturing over a dynamic range of more than a million to one, we can see details that cannot be seen by the human eye or any currently existing commercially available cameras. We also present a highly parallelizable and computationally efficient HDR reconstruction and tonemapping algorithm for extreme dynamic range scene. In comparison to most of the existing HDR work, our system can run in real-time, and requires no user intervention such as parameters fine tuning. ... Our algorithm runs at an interactive frame rate (30 fps) and also enables stereoscopic vision. Additionally, a hardware implementation, which uses FPGAs, will be presented. The initial hardware configuration comprises an Atlys circuitboard manufactured by Digilent Inc., which is small enough to fit inside a large shirt pocket. The circuit board includes two HDMI camera inputs, one being used for the left eye, and the other for the right eye, as well as HDMI outputs fed back to the left and right eyes, after processing of the video signals. The circuit board facilitates processing by way of a Xilinx Spartan 6, model LX45 FPGA." The demonstration video is pretty cool, and you can read about the FPGA and details of the HDR algorithm in the research paper.

hypnosec writes about a neat little hack using Lego, Raspberry Pis, and Scratch to construct a "supercomputer." From the article: "A team of computational engineers over at the University of Southampton led by Professor Simon Cox have built a supercomputer using Raspberry Pi and Lego. The supercomputer is comprised of 64 processors, 1TB of storage (16GB SD cards in each of the Raspberry Pis) and can be powered on using just a single 13-amp mains socket. MPI is used for communications between the nodes through the ethernet port. The team managed to build the core of the supercomputer for under £2500. Named 'Iridis-Pi' after University of Southampton's supercomputer Iridis, the supercomputer runs software that was built using Python and Scratch. Professor Cox used the free plug-in 'Python Tools for Visual Studio' to develop code for the Raspberry Pi." Lots of pictures of the thing, and a howto on making your own.

First time accepted submitter mrhelio writes "I work for a medium-sized helicopter company; we mainly fly tourists around on sightseeing flights. My company needs help finding a hacker-friendly portable music player for our helicopters. We have a problem with our onboard music players — mostly because it is an obsolete terrible design. The manufacturer has made an updated model, but it's basically the same obsolete design with the same terrible software and user interface. We are worried about spending $1000 per unit on these because the manufacturer will eventually stop making replacement units and then we will be force to buy upgrades for our entire fleet again and get everything recertified. (Any piece of equipment hard mounted in a commercial aircraft has to be certified by the FAA and it takes a lot of paper work, time and money for that to happen.) So we have a new plan: get portable music players like iPods, and plug those into the aux input in the intercom system. We need something that has nine hours of battery life, can hold at least three hours of music, and has remote control options for start, stop, volume, and selecting tracks and playlists, and a display that is visible in bright and sunny as well as dark conditions. The remote control option is the toughest part to find. The pilots need to be able to control the music without taking their hands off the flight controls for safety reasons. There are buttons and toggle switches already designed into the flight controls for these kind of purposes and we have mechanics/ engineers that can wire it all together, but the music player has to support the remote interface in the first place. Our first choice would be to give each pilot an iPod, but Apple is notoriously anti-hacking and anti-open source, plus you have to pay them ridiculous licensing fees to get access to their USB interface. So we are looking for a manufacturer that is open source / hacker friendly and makes something that meets our needs. Do you know of anything that would work for us? Maybe something that runs Rockbox? Should we just break down and design something from scratch like the Butterfly MP3 player?"

Zothecula writes "Well, Patrick Priebe might have outdone himself with this one. In the past, the German cyberpunk weapons-maker has brought us such creations as a wrist-mounted mini-crossbow, a laser-sighted rotary-saw-blade-shooting crossbow, and a flame-throwing glove. His latest nasty futuristic device? A video game-inspired electromagnetic weapon, called the Gauss Rifle."

The Wiki Weapon Project and its idea of making guns with 3D printers has already been mentioned on Slashdot. It has also been written up on Forbes.com and a lot of other geek and non-geek sites. Note that when some Wiki Weapon proponents talk about making "guns" with 3D printers, they may be talking only about lower receivers or other static parts, not barrels, firing pins or other parts that must be machined to close tolerances and are subjected to a lot of stress when the gun fires. But low-cost 3D printing and low-cost CNC machining technologies are both advancing at a rapid rate, so thinking about the intersection of firearm manufacturing and open source is both worthwhile and timely. There's been a strong debate about this topic on Eric S. Raymond's Armed and Dangerous blog that's worth reading. Also recommended: The Home Gunsmith.com and CNC Gunsmithing. Astute Slashdot readers will, no doubt, recommend many more. Meanwhile, this video is about licensing, distribution, and legal matters, not the actual manufacture of firearms. There's a transcript (we're finally doing transcripts of selected videos) below the video for those who prefer to read instead of watch.