An anonymous reader writes "Chris Testa recently presented at TAPR Digital Communications Conference and annouced his development work on a hand-held software defined radio. Running uClinux on an ARM Corex-M3 coupled to a Flash-based FPGA, it will be capable of receiving and transmitting from 100MHz to 1GHz. Designed to be low power, Chris has designed the radio primarily with the Amateur 2m and 70cm bands in mind. Currently in early prototyping stage, Chris intends to release the design under the TAPR Open Hardware License."

An anonymous reader writes "Joerg Sprave is at it again. This time, in order to bring in the New Year, he's got something with a bit more bang to it: a firecracker-launching slingshot. Being German, Joerg has built a slingshot that will accommodate the largest legal firecracker in that country. '2 grams of black powder in a tight cardboard "cigar" make a pretty loud bang! In order to make these bangs more spectacular, it is desirable to shoot them as high into the air as possible. A special slingshot crossbow has been designed, chambered for the strongest legal firecrackers. The weapon is a breech loader, and an integrated storm lighter allows the shooter to light the fuse when the weapon is all ready for the shot. The weapon launches the firecracker with tremendous force. The blunt object easily crashes through a moving card board box, and — equipped with a wooden tip — even goes in all the way into a block of ballistic gelatin.' His two videos are available on YouTube: part 1, part 2." This is the same gentleman who made a slingshot that launches machetes.

coop0030 writes "Wired has an article up about how Adafruit, the kit-based electronics retailer and promoter of hobbyist engineering, is aiming to teach electronics to a younger demographic. So young that they're enlisting the help of puppets. Their new online show, titled Circuit Playground, will teach the essentials of electronics and circuitry to children through kid-friendly dolls with names like Cappy the Capacitor and Hans the 555 Timer Chip. Limor 'Ladyada' Fried, Adafruit's founder and chief engineer (and 2012 Entrepreneur of the Year), will host the episodes, with her team assisting with onscreen and puppeteering duties. Episodes will premiere this March, and Fried holds hope for them to help inspire the next generation of designers and builders."

A reader writes "NASA scientists are planning to capture a 500 ton asteroid, relocate it and turn it into a space station for astronauts to refuel on their way to Mars. From the article: 'The 1.6bn-pound plan will be considered by the White House's Office of Science and technology in the coming weeks, as it prepares to set its space exploration agenda for the next decade, the Daily Mail reported. According to a report prepared by NASA and California Institute of Technology (Caltech) scientists, an, 'asteroid capture capsule' would be attached to an old Atlas V rocket and directed towards the asteroid between the earth and the moon. Once close, the asteroid capsule would release a 50ft diameter bag that would wrap around the spinning rock using drawstrings. The craft would then turn on its thrusters, using an estimated 300kg of propellant, to stop the asteroid in its tracks and tow it into a gravitationally neutral spot. From here space explorers would have a stationary base from which to launch trips deeper into space. Though NASA declined to comment on the project, it is believed that technology would make it possible within 10-12 years. The technology would also open up the possibility of mining other asteroids for their metals and minerals. Some are full of iron which could be used in the making of new space stations, others are made up of water which could be broken down into hydrogen and oxygen to make fuel. It is hoped that the project will increase our understanding of asteroids, and even shed new light on the origin of life on Earth.'"

An anonymous reader writes "Everyone has seen Raspberry Pi Computer, the credit card sized mini PC circuit board that costs only $35. Now there is a new Mobile Raspberry Pi called Pi-to-Go, with a mini LCD, 10-hour battery, and 64GB SSD, all packed together in a 3D printed case. See if you are up to the task to build your own."

beefsack writes "An engineer by the name of Andrej Skraba has combined an Arduino board and an MK802 mini PC running Ubuntu to create a robot which is controllable via its own node.js server and a mobile phone. Seen by some as products competing in a similar space, Andrej shows how the two devices can make the most of their unique features to complement each other, working together."

Sparrowvsrevolution writes in with a story at Forbes about Makerbot deleting gun component blueprints on Thingiverse. "In the wake of the Newtown, Connecticut shootings, the 3D-printing firm Makerbot has deleted a collection of blueprints for gun components from Thingiverse, its popular user-generated content website that hosts 3D-printable files. Though Thingiverse has long banned designs for weapons and their components in its terms of service, it rarely enforced the rule until the last few days, when the company's lawyer sent notices to users that their software models for gun parts were being purged from the site. Gun control advocates were especially concerned about the appearance of lower receivers for semi-automatic weapons that have appeared on Thingiverse. The lower receiver is the the 'body' of a gun, and its most regulated component. So 3D-printing that piece at home and attaching other parts ordered by mail might allow a lethal weapon to be obtained without any legal barriers or identification. Makerbot's move to delete those files may have been inspired in part by a group calling itself Defense Distributed, which announced its intention to create an entirely 3D-printable gun in August and planned to potentially upload it to Thingiverse. Defense Distributed says it's not deterred by Makerbot's move and will host the plans on its own site."

New submitter mihai.todor85 writes "It looks like Andrew 'bunnie' Huang has been quite busy lately, developing a nice open hardware laptop. He was even kind enough to provide all the schematics without NDA. For anybody interested in owning such a device, he says that he 'might be convinced to try a Kickstarter campaign in several months, once the design is stable and tested' if enough people are interested."

Today we're doing a live interview from 18:30 GMT until 20:30 GMT with long time contributor Luke Leighton of Rhombus Tech. An advocate of Free Software, he's been round the loop that many are now also exploring: looking for mass-volume Factories in China and ARM processor manufacturers that are truly friendly toward Free Software (clue: there aren't any). He's currently working on the first card for the EOMA-68 modular computer card specification based around the Allwinner A10, helping the KDE Plasma Active Team with their upcoming Vivaldi Tablet, and even working to build devices around a new embedded processor with the goal of gaining the FSF's Hardware Endorsement. Ask him anything. (It's no secret that he's a Slashdot reader, so expect answers from lkcl.)

coop0030 writes "Ladyada and pt had an old NeXT keyboard with a strong desire to get it running on a modern computer. These keyboards are durable, super clicky, and very satisfying to use! However, they are very old designs, specifically made for NeXT hardware: pre PS/2 and definitely pre-USB. That means you can't just plug the keyboard into a PS/2 port (even though it looks similar). There is no existing adapters for sale, and no code out there for getting these working, so we spent a few days and with a little research we got it working perfectly using an Arduino Micro as the go between."

lkcl writes about his effort to go further than others have, and actually have a processor designed for Free Software manufactured: "A new processor is being put together — one that is FSF Endorseable, contains no proprietary hardware engines, yet an 800MHz 8-core version would, at 38 GFLOPS, be powerful enough on raw GFLOPS performance figures to take on the 3ghz AMD Phenom II x4 940, the 3GHz Intel i7 920 and other respectable mid-range 100 Watt CPUs. The difference is: power consumption in 40nm for an 8-core version would be under 3 watts. The core design has been proven in 65nm, and is based on a hybrid approach, with its general-purpose instruction set being designed from the ground up to help accelerate 3D Graphics and Video Encode and Decode, an 8-core 800mhz version would be capable of 1080p30 H.264 decode, and have peak 3D rates of 320 million triangles/sec and a peak fill rate of 1600 million pixels/sec. The unusual step in the processor world is being taken to solicit input from the Free Software Community at large before going ahead with putting the chip together. So have at it: if given carte blanche, what interfaces and what features would you like an FSF-Endorseable mass-volume processor to have? (Please don't say 'DRM' or 'built-in spyware')." There's some discussion on arm-netbook. This is the guy behind the first EOMA-68 card (currently nearing production). As a heads ups, we'll be interviewing him in a live style similarly to Woz (although intentionally this time) next Tuesday.

An anonymous reader writes "Quoting liliputing: 'PengPod plans to start shipping 7 and 10 inch tablets with support for Linux as well as Google Android in January. The company, founded by Neal Peacock, has been raising money to help support software development for the tablets — and Peacock just wrote in to let us know the project has surpassed its initial $49,000 fundraising goal. In other words, the campaign will be fully funded and backers that pledged $120 or more should get their tablets starting in January if all goes according to plan.'" And, unlike many ARM SoCs, the kernel for the Allwinner A10 powering it is developed openly.

slashchuck writes "One of the drawbacks of Google's Nexus 4 was its lack of support for 4G LTE. Now comes a report from AnandTech that it's possible to enable partial LTE support on the device. It seems that a simple software update can allow the Nexus 4 smartphone to run on LTE Band 4. All users have to do is dial *#*#4636#*#* (INFO) or launch the Phone Info app. After that, choosing to connect to AWS networks should allow the Nexus 4 to run on LTE networks on Band 4. The AnandTech report states explicitly that the LG Nexus 4 only works on LTE Band 4, on 1700/2100MHz frequencies, and supports bandwidths of 5,10, and 20MHz."

mask.of.sanity writes "This custom Yamaha TRX 850 has been outfitted with wireless sniffing and attack tools, routers, a laptop, Raspberry Pi and even a heads up display integrated within the bike helmet. It was built from open source kit and cheap hardware by a security penetration tester who wanted to make his love of wardriving more nimble. The plans are detailed in a diagram and a video."

mbstone writes "The Namib Desert Beetle generates water from water vapor via its shell, which has alternating hydrophilic and hydrophobic bumps which channel water droplets into its mouth. Scientists at MIT developed a self-filling water bottle using this technology, and have announced a contest for the best design of a countertop water-from-air generator."

concertina226 writes "Called the Raspberry Pi 'hack day', the competition will pit 100 entrants against one another in a number of categories using only the board, Internet access, soldering irons and as much coding as they think appropriate. Participants will have 24-hours to complete projects, at the end of which winners will be awarded from a variety of prizes including camcorders, Android tablets and the geek must-have, the Hubsan H107 Quadcopter."

An anonymous reader writes "Developers been working hard for the past few months to get Linux ported to the TI-Nspire calculator. The port is not yet fully stabilized nor quite ready for broad consumption and requires some user-level knowledge of Linux systems, but is definitely worth a try. Experimental support for root filesystem installed on USB mass storage is being worked on, so that Datalight's proprietary Flash FX/Reliance filesystem used by TI's OS isn't a limit anymore. This also means that the native TI-Nspire OS image is not replaced by the Linux system, and Linux can been booted on demand. Support for USB keyboard, X server, directFB, Wi-Fi (with the help of a powered USB hub) and text-based Internet browsing is progressively being added and tested."

Hugh Pickens writes "Josie Garthwaite writes that old electric car batteries degraded below acceptable performance levels for autos still have enough life to serve the grid for at least ten years with a prototype announced by GM and ABB lashing five Chevy Volt battery packs together in an array with a capacity of 10 kilowatt-hours — enough to provide electricity for three to five average houses for two hours. 'In a car, you want immediate power, and you want a lot of it,' says Alexandra Goodson. 'We're discharging for two hours instead of immediately accelerating. It's not nearly as demanding on the system.'" (Read on, below.)

An anonymous reader writes "Google's Nexus 4 sold out around the world very quickly this week, and while there was talk of very limited supply, apparently some key people managed to get their hands on it. That's right: the Nexus 4 has already been rooted."

Penurious Penguin writes "Via LXer, an article from PCWorld describes the A13-OLinuXino, produced by OLIMEX. Similar, but distinct from the Raspberry Pi, the Linux-powered OLinuXino is touted as 'fully open,' with all CAD files and source-code freely available for both personal and commercial reuse. Its specs include an Allwinner A13 Cortex A8 1GHz processor, 3D Maili400 GPU, 512MB RAM, all packed into a nano-ITX form and fit for operation in industrial environments between -25C and 85C. The device comes with Android 4.0, but is capable of running other Linux distros, e.g., ArchlinuxARM."