Want to read Slashdot from your mobile device? Point it at m.slashdot.org and keep reading!

 



Forgot your password?
typodupeerror
×
Space United States

SpaceX Starship Test Rocket Was Knocked Over By High Winds (popularmechanics.com) 66

Strong Texas winds managed to knock over SpaceX's prototype of its next-generation Starship rocket. In a tweet, CEO Elon Musk tweeted yesterday: "50 mph winds broke the mooring blocks late last night & fairing was blown over. Will take a few weeks to repair." He added: "Actual [fuel] tanks are fine." Popular Mechanics reports: The hopper, based out of the company's launch site in Boca Chica, Texas, is not meant for the stars: It is a test machine meant to show that the Starship's fundamentals can work in terms of launching and landing. SpaceX wants the rocket to go 16,400 feet into the air (a hop, so to speak) and land again. The wind, sadly, had other plans and knocked the hopper's nosecone around.

The accident appears to have first reached the public through eagle-eyed SpaceX aficionados on a message board which updates with even the smallest changes in anything related to the company's plans. Their methods include everything from drone flyovers to driving by the site. It's hard to tell what damage has precisely happened to the hopper in its fall, but it appears to be more complex than simply righting back up again.

This discussion has been archived. No new comments can be posted.

SpaceX Starship Test Rocket Was Knocked Over By High Winds

Comments Filter:
  • by jfdavis668 ( 1414919 ) on Thursday January 24, 2019 @07:47PM (#58017606)
    came down and smited thee.
  • Back in the 90s during the first wave of NewSpace companies, the Rotary Rocket Roton ATV (Atmopsheric Test Vehicle - similar mission plan as this one) had a grand unveiling on a very typically windy Mojave day. Had the tanks not been ballasted with water it would have toppled over. Was an interesting day for many reasons.

    • I went inside of the Rotron one day in Mojave about 10 years ago. It was standing on display next to a video kiosk, and they put the PC controlling the kiosk in the rotron, and that day the PC guy had left the door on the bottom of the Rotron unlocked. Of course some things could have been removed from the Rotron by then, but the inside was hollow. A few small tanks, and the control cab way up where I couldn't reach it. Birds were nesting in it.

  • by Ecuador ( 740021 ) on Thursday January 24, 2019 @08:45PM (#58017946) Homepage

    Well, duh, it wasn't built to withstand winds - there's no air in space! :-O

    • by mentil ( 1748130 )

      But there are solar winds.

    • by 4im ( 181450 )

      There may not be air / wind in space, but what about the one destination for BFR that's being talked about so much - i.e. Mars? There's an atmosphere (thin maybe), there's wind, there are sandstorms. What will those do to a freshly landed BFR not weighted down with loads of fuel?

      While it may not be like in "The Martian", some calculations are warrented to be on the safe side.

      • The harshest winds Mars can offer wouldn't tip over an empty hopper faring. You'd barely feel it. A 100 MPH wind on Mars feels nothing like a 100 MPH wind on Earth because there's only 1/100th of the air blowing.

    • "But there's an Air in Space Museum" -- Homer
  • I am a big fan of Elon Musk, Tesla, and SpaceX. That said, this is the most half-assed project I've seen them do, and that includes the Monty-Python-esque brick tower constructed for Boring company for which they advertised a position for someone to be at the top and yell abuse in an outrageous french accent [montypython.net]. I assume this person was in the Tesla lay-offs.

    Its construction was like that of a film set, and like a film set it got blown over in the first high wind. Inside there is a triangular truss structure l

    • by Strider- ( 39683 )

      An least according to one tweet, the thing broke loose from its anchor blocks. So it looks like they did secure it, it's just that it overwhelmed the anchoring system.

      • It wasn't attached to the bottom of the rocket, though, which is bolted to concrete. I'm not sure it was even standing, it might have been already on its side for installation of the tank bulkheads, which had been seen there recently. That would have been a really weak position to be in the wind.
        • Thanks Bruce. About the only non-troll to respond. Trolls can be fun, but most fail at it nowadays.

        • by Rei ( 128717 )

          You seem to be confused.

          1) You could never put this thing on its side; it's not designed to bear loads like that. At least not without building some sort of temporary internal scaffolding first.
          2) The part that fell over is the fairing. You don't install bulkheads in a fairing. It's just thin tacked stainless sheet - you can't support liquid with that.
          3) They're already installing the bulkheads in the actual tankage section (the bottom part). Top bulkhead just went on.

          The simple matter is, they're doing

    • by argee ( 1327877 )

      Indeed, guy wires. Or, even guy ropes. On my self supporting ham radio tower, it used to sway 3 ft at the top. Alarming. So I put in a set of 3 ropes,
      just 3/8 diameter. I used non-stretch rope. Sway now only 12" of less. And less jerky. About $50.

      I envision 3 ropes on that rocket. When its time to launch, just cut them off at ground level and let them dangle. They will vaporize in no time. Of course,
      rocket scientists are going to have apoplexy over this suggestion.

      • SpaceX actually has a high-load cable system that can hold down the rocket with all engines firing. This is in a lot of photos of static fire tests at their engine test site in Macgregor, Texas. They put it on and take it off with a crane.
    • The cost of fixing the damage is likely far less than the cost of a hurricane-proof building.

  • I had the mental picture of Wil E. Coyote all frustrated that his Acme-brand super duper rocket got blown over.
  • So Shiny
    • Re:Shiny (Score:5, Interesting)

      by Rei ( 128717 ) on Friday January 25, 2019 @04:49AM (#58019438) Homepage

      On purpose. The reentry system being tested for Starship is very different from any other ever used. Normally the goal is to radiate heat, so you want a high emissivity (generally black) material. Starship (the actual vehicle, not this test hopper) on the other hand is designed to never get excessively hot in the first place - a double-layer skin with liquid between the layers and the outer layer perforated by tiny holes, through which heated coolant can vaporize out (creating a protective boundary layer while simultaneously removing heat). So the goal is to reject heat rather than absorb-then-radiate it. This means a low emissivity material, which generally means "shiny". :)

      It's still going to get tremendously hot, of course - the craft is being designed for direct aerocapture from MTO. So alumium is right out. But stainless is such a great material for so many reasons... most of which is its resilience. Something which carbon fibre isn't, and a big reason I was very apprehensive about SpaceX's original BFR design. It's also 1/50th the cost, comparably easy to work with, and people who know how to do so are a dime a dozen. It's strong, very inert (even in hostile environments), and with the right alloy retains its resilience even at cryogenic temperatures, while its tensile strength only grows. I'm very happy with the switch. Heck, it's even higher-Z, meaning it'll be more effective at blocking solar radiation (won't do much against GCR except kick off secondary radiation, but GCR is a far lower flux).

Crazee Edeee, his prices are INSANE!!!

Working...