Europa's Ice May Be Miles Thick 39
serutan writes "Space.com has an article detailing recent measurements of the shell of ice covering what is believed to be an enormously deep ocean on Europa, which could harbor life. The thickness of the ice -- many times the previous estimate -- poses a major obstacle to sending a lander that would burrow down through it to the water. [Seems like if they could make the probe kinda warm it would eventually sink through any amount of ice.]"
Intel Inside (Score:3, Funny)
Re:Intel Inside (Score:1)
Just look at the cheap junk Intel's putting out now a days. Rip the heat sink off, and they keep running. I'm sorry, but a processor just isn't doing its job unless you can cook a potatoe on it in under 30sec.
Unlike other /.ers, I'm willing to back up my boasts! [tomshardware.com]
Eventually can be a long time (Score:2, Interesting)
An alternative approach might be to punch through in one explosive event. Steer an appropriately sized cometary nucleus into Europa, wait for things to settle down a little and then dive into the relatively thin and slushy crater floor.
Paul
Re: Make a crater? (Score:3, Insightful)
Seriously, you could disrupt things that way even if it's only bacteria mats.
Re:Eventually can be a long time (Score:1)
Re:Eventually can be a long time (Score:2)
The problem I see presented is: once you have your bot in place under twelve miles of ice, how do you get your signal back? Through a tether? Then how do you get the tether through all that ice without it freezing in place and jamming the probe during descent? There are some neat engineering challenges in this idea...
Re:Eventually can be a long time (Score:1)
I'd like to know how using a encapsulated radioactive material that creates one explosive even would take place with exposing radiation and/or radioactive material? Kay, thanks.
Communicating through 12 miles of Ice (Score:1)
Use the same technique that wire guided missiles use, the tether is deployed from the probe/tunneler it doesn't matter if it freezes in place then, in fact it would be a good idea, since that would probably support the mass of the tether and reduce risk of it breaking. Of course, if the ice isn't rock solidly imobile, then the slightest shift would slice most practical tethers instantly.
Re:Eventually can be a long time (Score:1)
Put the tether spool on the (descending) bot. Then it wouldn't matter that the upper parts of the cable were frozen in place, because they don't need to move.
Re:Eventually can be a long time (Score:2)
Yep, that'll do it. (To both posts)
Are you nuts? (Score:1)
I'm pretty sure the Europians will take something like that as an act of war.
Re:Are you nuts? (Score:1)
Could this hurt? (Score:1)
On the other hand there is nothing those wacky Nasa engineers can't do with time.
"make the probe warm" (Score:2)
Re:"make the probe warm" (Score:2)
Disclaimer: IANAPhysicist
Doesn't it crack in places? (Score:2)
Re:Doesn't it crack in places? (Score:3, Interesting)
The cracks once formed last for many many years. I don't offhand remember how many millenia they last for. But they are easily visible and well mapped. The crack forms, the water freezes over, but (the article argues) water should be forced into the crack due to tidal forces. Eventually, the crack will seal up but as I said it would take a long time.
Anyway, sounds like it's worth a shot.
Re:Doesn't it crack in places? (Score:2)
Exactly! Article is too pessimistic. (Score:2)
The recent American Scientist article [sigmaxi.org] on this described how the constant flexing of the moon in its orbit around Jupiter may produce tides that rise through the myriad cracks on the surface, bringing water close to the surface.. The cracks are plentiful and it shouldn't be too hard to find the more recent ones. Actually, the article describes in some detail crack formation and propogation. The overall impression is that this is a constant process and that it may be an easy way of getting to the sub-europan ocean.
Re:Exactly! Article is too pessimistic. (Score:1)
And, if these cracks are formed by tidal forces that ar constantly changing, how do you propose that people stop the probe from being crushed in the process? Several millions of tons of ice are likely to destroy just about any machinery.
"Kinda Warm" prolly won't do it. (Score:2, Interesting)
Given an infinite amount of heat energy, sure. But if the probe's just "kinda warm", it will merely create a stable pocket of water around itself. The water will never get significantly above 32 degrees (F) ya know.
Eventually the area of the boundary between the liquid pocket and the surrounding ice will be sufficent that you'll be losing heat faster than you're putting it in - unless you are talking a lot more heat than "kinda warm" - the kind of heat we might refer to as "unbelieveably blazing hot consuming titanic amounts of energy".
Hey, how 'bout this: Leave a solar array on the surface, make the submersible part as small as possible (camera, heat elements, and spool of fine wire). Then you can power the heater electrically from a wire you unwind as your blazing hot ice-melter sinks.
You heard it first on Slashdot! (Of course, I *am* a former rocket scientist, so we might be cheating)....
Re:"Kinda Warm" prolly won't do it. (Score:1)
But gravity will pull the probe to the bottom of the pocket, continuing to melt the ice underneath it (while the water at the top of the pocket will refreeze). Assuming you can make a probe maintain >32 degrees long enough for it to reach the ocean, it should create a falling pocket of water through the ice.
Once the ice-melter gets down a ways (e.g. half a mile), I'd think that you'd have to worry about the ice above it freezing to the wire, thus preventing the ice-melter from burrowing any deeper.
Re:"Kinda Warm" prolly won't do it. (Score:2)
Try this experiment with your soldering iron: leave it turned up to highest setting resting point-downward on a block of lead. It will only sink a certain amount before the (efficient) liquid-coupled heat sink overwhelms the (less efficient) gravity-driven solid contact. On second thought, don't do the experiment, take my word for it. We really don't need to do such energy-wasteful experimentation, somebody just needs to explain this better than me.
Hopefully (I really don't know what insolation is available on Europa - the sun's pretty far off) we can get enough juice from solar panels to keep the probe insanely hot, thus allowing the "sinking bubble of water" concept to function. If not, we could still go with the nuke-plant idea but put it on the surface to avoid unnecessary risk of contaminating the inner sea.
I was figuring more like about four feet! But, it doesn't matter as long as the unreeling spool is on the probe and not on the surface. The line will serve for communication from the probe, too, and freezing it in solid will protect it from the inevitable terrorist attacks.
Would melting the ice work? Let's see... (Score:3, Informative)
That's a bit of an understatement. Let's do a quick calculation, shall we?
The article says that the ice is at least 19km (11 miles) thick. Let's assume we can somehow magically make our probe fit into the volume of a square foot or 30cm per side. That means we have about 1700 square meters of ice to melt, which is around 2e6 kilograms.
Europa has no real atmosphere, the pressure at the surface is around 1e-11 bar (1e-6 Pa) -- i.e. almost nothing. So the ice would most certainly vaporize rather than melt, and at a temperature lower than 0C. See this neat phase diagram of water. [sbu.ac.uk] As we go down farther the pressure will necessarily increase, but I don't feel like calculating it exactly. Based on the phase diagram I'll use 200K as the approximate transistion temperature. It's close enough to be within an order of magnitude of correct.
The surface temperature of Europa is approx -260 dF (111 Kelvin), so to raise it to 200K results in a temperature difference of 89K. The specific heat of ice is around 2e3 J/(kg*K). That means our task will require about 3.5e11 Joules of energy. Let's say we let this process take 100 years at a steady rate. This comes to about 111 Watts. Suddenly "kinda warm" really doesn't cut it.
When you have a self contained source of power that can supply 111 W constantly for 100 years and fit into a square foot of volume, please let me know. Surely, you would have solved our energy crisis by now.
PS - Solar panels are pretty much useless after you get farther from the sun than Mars. That's why probes like Cassini needs radio-isotope thermo-electric generators.
melting might not work (Score:3, Interesting)
Good idea, but not necessarily. Ice packs tend to be dynamic flows with upwelling, downwelling and lateral movement. Metling say a few meters a day, would still take year or even more to reach the ocean below. In addition, the pressures below the ice pack will be immense once the liquid ocean is reached. Not to mention the giant pod eating monsters that probably lurk there.
Cornell Europa lander (Score:4, Interesting)
Unfortunately, I believe they didn't have too much luck. Their cylindrical probe would only melt the ice right under it. The walls would freeze back into place and hold it with friction (since ice expands, and as such would create pressure on the hull). I wonder if they would have been more successful with a raindrop-shaped design, where the pressure from the refreezing ice would actually help propel it downward. In any case, the high pressures involved would probably crush any payload.
The other problem was how to relay any information it harvested back to the surface, so it could be retransmitted to Earth. H2O blocks most radio waves pretty well, and stringing a wire all that distance suffers similar problems as the probe itself -- you'd have to keep it hot to keep moving.
Until then, we'll just have to rely on remote sensing...
If they keep it warm?! (Score:1)
uptake heat = given heat.
dont want to start about that second Law again but, hasnt any done some of these experiments on highschool ?
You have many tons of very very cold ice and you want to melt trough it with a hot space probe???
How hot do you want to have it? Water has also one of the highest heat capacities known unless to can keep on generating a lot of heat and the probe has a substancial mass and heat capacity forget about it.
Besides that the water melted before would freeze again and that leaves one with the problem of getting the prove out of the ice again.
We can use nuclear heat ... (Score:2)
Unless the tunnel collapsed or filled with frost you wouldn't have liquid water surrounding the probe until it gets to an ocean. As I recall in vaccuum there is no liquid phase of water. It would flash to gaseous form and spew out the end of the tunnel.
The problem I foresee with this approach is the probe hitting a pocket of liquid water deeper into the ice. If there is no seal behind the probe the pressure difference might be sufficient to blow the probe out of the tunnel. It would need to constantly anchor itself against the tunnel walls -- it would probably have to be a fairly hefty piece of machinery.
If Dean Martin were still with us... (Score:2)